Don't forget, on WEDNESDAYS (Thursdays on the first week of each month)  there's a new episode of LIVE CHAT hosted by Marc Spess on at 8pm Central time. Set you computer's alarm so ya don't forget!

Here's a link to the live show page... Click Here!

Views: 2619

Reply to This

Replies to This Discussion

I was Marc's guest last night on his Live Chat show, if you missed it, you can replay it. It was a lot of fun nerding out with everyone and I hope to do it again sometime soon.

It was really great to hear from you 'in person'. My favorite part was learning that you had been working at Pixar for a couple of years when you decided to create this website... you can take the animator away from the puppet but, you can't take the puppet away from the animator.

That was great - thanks for doing the live interview Anthony!  It comes in the middle of my working day so I don't always get a chance to turn up, but I'm glad I made it for this one.

I'm assuming there's no show tonight because of the  July 4th Independence Day holiday here in the USA. (no offense to you guys in England )

Great News, Marc is planning on doing a Live Chat show TONIGHT. (Thurs) He postponed the show instead of cancelling it.

Woo-Hoo!

AAArrrrgggghh.  My wife got home and immediately hogged the computer.  AAARRRGGGHHH!  Maybe next week.--- Just saw that the show has been moved to tonight, that is GREAT!  See you all there.

Here's your happy weekly reminder to get yourself over to AnimateClay.com for the Live Chat show tonight at 8pm Central Time. So set your stop motion clock alarm for that time now. Don't forget to bring your puppets, surface gauges, and X-sheets! (you won't actually need them but, it's just the right thing to do )

I am already on the site, waiting breathlessly. . . .

Iiiiiiiiiiiiiiiiiit's Wednesdayyyyyyyyyyyy!!! I'm excited, you excited?

There will be another special THURSDAY EDITION of the Live Chat show on AnimateClay.com TONIGHT!

Last night the usual crowd of stop motion enthusiasts showed up but, NO SHOW??? We had a bit of fun in the chat room waiting for Marc (our lovely and gracious host) to show up but............. he never did. As it turns  out, we eventually figured out that it was Marc's birthday and that little factoid had been posted on Facebook but nowhere else.

So late last night I got an email from the man himself   and he wanted me to inform you all that he will be putting on a rain-date show tonight at the usual time!  8pm Central

For those who didn't see my message earlier today... There will be a special Thursday edition of the Live Chat show on AnimateClay.com TONIGHT!

Reply to Discussion

RSS

GUMBY FEST 2015

MESSAGE BOARD QUICK LINKS

Message Board

Steel Cut Oats

Started by Harry Chaskin in YOUR STOPMO FILM PROJECT. Last reply by Adam Taylor 11 hours ago. 14 Replies

Hello All! Wanted to let you know about a new short film I am making entitled Steel Cut Oats. I don't usually ask for help when it comes to my personal projects, but I finally bit the bullet and I'm launching a Kickstarter campaign in order to raise…Continue

Monster Makers Foam -- New Mix Ratios

Started by Santino Vitale in CASTING. Last reply by Santino Vitale on Friday. 2 Replies

Hello all,I'm not sure how many of you out there use Monster Makers foam latex -- for me, it's the ONLY foam I ever use and have recommended it highly over the years.... till recently.This past week, I bought a new quart kit for a project, and…Continue

Tags: gelling, bad, puppets, casting, makers

Lookinbg for some stop motion dinosaurs

Started by John Martin in NEWBIE CORNER. Last reply by John Martin on Thursday. 4 Replies

I am a filmmaking veteran of 43 years. I began in 8MM and moved on with the times, now shooting in digital. I am not a professional. My very first film was a stop motion project called MONSTER ISLAND. To make a long story short, after 43 years, I am…Continue

Has anyone cast from polyamide 3d prints?

Started by Joshua Liebling in CASTING. Last reply by Joshua Liebling on Thursday. 2 Replies

Polyamide plastic will apparently break down with water exposure, so this rules out gypsum molds. I'm curious if anyone here knows whether two-part silicone putty or other material would work with polyamide? I know this can be done with PLA. My end…Continue

Tags: mold, making, polyamide, casting, printing

Lighting Equipment

Started by Krista W in ANIMATION TOOLS & EQUIPMENT. Last reply by StopmoNick on Thursday. 1 Reply

Hello, I recently received funding for my stop motion project.  I would like to purchase lighting equipment that I can use for this and future projects.  Any suggestions? Lighting is the one area that I don't know much about. Thoughts on dimmer? Any…Continue

Please Introduce Yourself

Started by Anthony Scott in CHAT BOARD. Last reply by Chris Neuhahn on Wednesday. 459 Replies

Use this space to tell everyone about yourself and your interest in stop motion animation.Continue

BLOGS

Create a Blog for your personal page. Go to My Page and click on Blog Posts. Access all Blog Posts here.

Photos

Loading…

Members

© 2015   Created by Anthony Scott.   Powered by

Badges  |  Report an Issue  |  Terms of Service

.xg_widget_forum_index_index .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_listForCategory .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_show .xg_column.xg_span-7.xg_last {display:none;}