Comment by Dean B on December 8, 2012 at 8:43pm
Hi, Jonathan. I saw your project on Kickstarter a few days ago. It looks like a cool project - I especially like the setting. However, it is a shame that all the incentives are only available to US residents. This really limits your audience and will undoubtedly make reaching your goal a bigger challenge. I hope you get there. Good luck! From a disgruntled Englishman :)
Comment by Jonathan Franks on December 8, 2012 at 8:49pm

Thanks did you check out our faq page. It reads- We are more than happy to take international backers, however we've only budgeted for domestic shipping. Therefore, if you are willing to cover the difference in shipping to your international locale we are more than happy to accommodate you! Just shoot us a message to let us know where you're located and what reward level you will be at, and we will let you know the difference in shipping costs to get you your rewards!

Comment by Dean B on December 8, 2012 at 9:02pm

Ah, my apologies. Once I saw the 'Ships within the US only' I didn't scroll any further down the page. Is there any way to move the FAQ (or a similar memo regarding international shipping) to nearer the top of the page so other potential backers don't make the same mistake as I did? I shall have another look at your incentives and tally my gold :)

Comment by Jonathan Franks on December 8, 2012 at 9:07pm

That's a good Idea, Thanks!

Comment by Jonathan Franks on December 8, 2012 at 9:21pm

And yes, tally that gold. Haha. Thanks

Comment by Dean B on December 24, 2012 at 9:32pm

Congratulations on getting funded!

Could you possibly tell me how much shipping to the UK is for the $25 pledge? I meant to pledge before but when I clicked proceed, a big red banner popped up saying "WARNING! YOU ARE NOT IN THE US. TURN BACK NOW. WARNING!" Or something similar.


You need to be a member of to add comments!



Message Board

Jim Danforth Vol 2 out now!

Started by StopmoNick in STOP MOTION BOOKS. Last reply by John Downey 1 hour ago. 2 Replies

Woo Hoo!  I just put in my order for Vol 2 of Jim Danforth's autobiography, published by Archive Editions.  It is published on a CD rather than as a printed book, which I would have preferred, but it does manage to fit a huge amount of material in…Continue

Tags: Timegate, Caveman, trickfilm, motion, Stop

Solenoid actuator as a shutter release? Mythbusters style!

Started by Strider in CAMERA & STAGE. Last reply by Thomas Nicol 6 hours ago. 18 Replies

I've got a camera that doesn't allow any kind of remote shutter release, mechanical or electronic, and I'd like to rig one up for it. My idea is to use some kind of linear actuator Mythbusters style. I've seen them use these things to push all kinds…Continue

Canon Rebel T5 Adapter & Lens?

Started by Ron Cole in CAMERA & STAGE. Last reply by Greyguy 10 hours ago. 46 Replies

I recently purchased a Canon Rebel T5 (not T5i) and I need to buy a Nikon lens and lens adapter for it. I thought that would be easy but I've been frustrated for days trying to figure out what to buy. All I want is a basic standard lens. (I was…Continue

Tags: Nikon, lens, adapter, T5, Rebel

DSLR Flickering issues?

Started by Raven Ocara in STOP MOTION FILM DISCUSSION. Last reply by Santino Vitale 18 hours ago. 11 Replies

So I have Dragonframe 3.6 and am using a Canon T5 camera with the standard lens that it came with. I am using desk lamps for my lighting and black poster boards for my floor and wall. I have two Lego Bionicle characters trying to talk to each other-…Continue

Copper wire fingers?

Started by Angus Lamont in ARMATURES. Last reply by trikfx on Sunday. 9 Replies

HiI recently bought a beautiful looking ball and socket H1 Pro armature from Malvern Armatures. I also bought a pair of hands with it, and the fingers are made up with twisted copper wire. I've never used copper wire for fingers, only aluminium, but…Continue

Tags: copper, armature

Cleaning non digital noise from shots

Started by Waya Malling in STOP MOTION & COMPUTERS. Last reply by Waya Malling on Sunday. 6 Replies

Hi I shot cut out animation under a sheet of glass and as a result of the glass I have a lot of "dust" ( not sure what to call it) noise on my shots . Does any one know of an effective way to clean this ?I use after effects CS6 so any method…Continue

Tags: CutOut, AE



Create a Blog for your personal page. Go to My Page and click on Blog Posts. Access all Blog Posts here.




© 2015   Created by Anthony Scott.   Powered by

Badges  |  Report an Issue  |  Terms of Service

.xg_widget_forum_index_index .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_listForCategory .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_show .xg_column.xg_span-7.xg_last {display:none;}