Comment by Dean B on December 8, 2012 at 8:43pm
Hi, Jonathan. I saw your project on Kickstarter a few days ago. It looks like a cool project - I especially like the setting. However, it is a shame that all the incentives are only available to US residents. This really limits your audience and will undoubtedly make reaching your goal a bigger challenge. I hope you get there. Good luck! From a disgruntled Englishman :)
Comment by Jonathan Franks on December 8, 2012 at 8:49pm

Thanks did you check out our faq page. It reads- We are more than happy to take international backers, however we've only budgeted for domestic shipping. Therefore, if you are willing to cover the difference in shipping to your international locale we are more than happy to accommodate you! Just shoot us a message to let us know where you're located and what reward level you will be at, and we will let you know the difference in shipping costs to get you your rewards!

Comment by Dean B on December 8, 2012 at 9:02pm

Ah, my apologies. Once I saw the 'Ships within the US only' I didn't scroll any further down the page. Is there any way to move the FAQ (or a similar memo regarding international shipping) to nearer the top of the page so other potential backers don't make the same mistake as I did? I shall have another look at your incentives and tally my gold :)

Comment by Jonathan Franks on December 8, 2012 at 9:07pm

That's a good Idea, Thanks!

Comment by Jonathan Franks on December 8, 2012 at 9:21pm

And yes, tally that gold. Haha. Thanks

Comment by Dean B on December 24, 2012 at 9:32pm

Congratulations on getting funded!

Could you possibly tell me how much shipping to the UK is for the $25 pledge? I meant to pledge before but when I clicked proceed, a big red banner popped up saying "WARNING! YOU ARE NOT IN THE US. TURN BACK NOW. WARNING!" Or something similar.

Comment

You need to be a member of StopMotionAnimation.com to add comments!

Join StopMotionAnimation.com

Puppet Putty

Puppet Putty is formulated by clay animator Don Carlson. Properties include colors that do not bleed on your hands, a matte finish, cleans up with water, is very light weight, firm, non-greasy and has a silky texture.

MESSAGE BOARD QUICK LINKS

Message Board

I want to pour polyurethane foam inside a latex rubber skin puppet to fill the negative space

Started by Eric Halloy in GENERAL PUPPET MAKING 2 minutes ago. 0 Replies

I want to pour polyurethane foam inside my latex rubber skin puppet to fill the negative space between the skin and the armature. The brand is FlexFoam-it III (the three pound density). I am at the stage in the construction of my puppet where I can…Continue

The Woods Where We Played

Started by Christopher Olsen in YOUR STOPMO FILM PROJECT. Last reply by Zaid 20 minutes ago. 8 Replies

Hey guys, I've been a REALLY long time lurker, since the old boards, but I rarely made the time to really dig in and post a lot. Instead I would just find the info I needed, use it shamelessly and rarely even take the time to say "Hey thanks, that…Continue

Shanks FX Practical/Stop-Motion Effects

Started by Roger Beck in GENERAL SPECIAL EFFECTS. Last reply by Zaid 21 minutes ago. 1 Reply

I thought that some folks here might be interested in this…http://www.moviemagicnow.com/There are some really cool practical effects that are covered.Here is an example video…Here is his…Continue

Tags: Shanks FX, Stop-Motion, Practical Effects

Rig removal with a camera move

Started by Christopher Olsen in STOP MOTION & COMPUTERS. Last reply by Christopher Olsen 6 hours ago. 10 Replies

Hey guys, what are everyone's thoughts/tips on rig removal in a moving camera shot? Example would be a pan or a tilt shot where the camera is continuously moving at the same time as the character is moving.Obviously the normal "take a static master…Continue

Tags: move, camera, removal, rig

Stop Motion Camera Slider Rig

Started by Christopher Olsen in ANIMATION TOOLS & EQUIPMENT. Last reply by Christopher Olsen 6 hours ago. 8 Replies

Hey guys, thought I would share the stop motion camera rig I built for a film I'm working on right now.The rig is fairly simple in design, it's just two aluminum rails from IKEA that I bolted to two pieces of masonite laminated together for…Continue

Camera Count

Started by Michael in CAMERA & STAGE. Last reply by StopmoNick 9 hours ago. 3 Replies

Hi to everybody, this is my first post here.I am looking to purchase a used Canon 40D to be used with Dragonframe.  I keep seeing people on ebay asking what is the camera count.  Since I would be using a frame grabber, is the count something I…Continue

Photos

Loading…

Events

BLOGS

Create a Blog for your personal page. Go to My Page and click on Blog Posts. Access all Blog Posts here.

Members

© 2014   Created by Anthony Scott.   Powered by

Badges  |  Report an Issue  |  Terms of Service

.xg_widget_forum_index_index .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_listForCategory .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_show .xg_column.xg_span-7.xg_last {display:none;}