Test for ship propulsion Mat. The 3D will represent 60% of the film. It is a personal choice and a practical choice. The purist will stop motion disappointed. My knowledge is very limited 3d. But sti…

Test for ship propulsion Mat. The 3D will represent 60% of the film. It is a personal choice and a practical choice. The purist will stop motion disappointed. My knowledge is very limited 3d. But still I managed to get a result that pleases me. In fact, my biggest challenge for this project and achieve almost tell a story without words. For that, I’m not going to focus on a single technique. I love stop motion magic this technique to keep from the original film. I do not like the real long movies with real actors. They bore me. They contain more for me, magic long ago. 3d, it gives me the neccessary space to tell the story. If I were to build the ship mast, it will 3 meters high and 6 meter long. My apartment is 60m2 and I peus that conssacrer 10m2 for the moment in my project. With my 3D software and my computer, I have an entire universe of available. Of course, all Difficulty is to keep the magic of stop motion in a 3d world. Finally, at the end of ends, art is just to erase a story.

Un test de propulsion pour le vaisseau de Mat. La 3d va représenter 60% du film. C’est un choix personnel et un choix pratique. Les puriste de la stop motion seront déçu. Mes connaissances en 3d sont  très limitées. Mais je parviens quand même a obtenir un résultat qui me plait. En fait, mon plus grand défi pour ce projet et de parvenir à raconter une histoire presque sans parole. Pour cela, je ne vais pas m’attacher à une seule technique. J’aime la stop motion pour la magie que cette technique à conserver depuis l’origine du cinéma. Je n’aime plus depuis longtemps les vrai films avec de vrai acteurs. Ils m’ennuient. Ils ne recèlent plus, pour moi, de magie depuis bien longtemps. La 3d, elle, m’offre l’espace neccessaire pour raconter l’histoire. Si je devais construire le vaisseau de mat, il ferai 3 metres de haut pour 6 metre de long. Mon appart fait 60m2 et je ne peus que conssacrer pour le moment que 10m2 à mon projet. Avec mon logiciel 3d et mon ordi, j’ai un univers entier de disponible. Bien sur, toute la difficultée est de garder la magie de la stop motion dans un univers 3d. Enfin, à la fin des fins, la technique doit s’éffacer pour juste raconter une histoire.

Views: 41


You need to be a member of StopMotionAnimation.com to add comments!

Join StopMotionAnimation.com


The Complete 50s series now available on DVD. Fully Remastered with the Original 50s Soundtrack.


Message Board

What is the best for my application? StopMotionPro7 or Dragonframe?

Started by Darren Nemeth in STOP MOTION & COMPUTERS. Last reply by StopmoNick 18 hours ago. 13 Replies

I am going to start an animation project of sorts and am looking for input. I have a hobby collecting old nitrate motion picture film and will start to transfer them digitally early next year. Most will be heading to YouTube for free viewing before…Continue

How do you export your movies from Dragonframe?

Started by FilmBrs in STOP MOTION & COMPUTERS. Last reply by StopmoNick 18 hours ago. 1 Reply

When I export my movies from Dragonframe, the videos show to much and, let's say, a close up becomes a wide shot when I export it and it shows the stuff from behind the set, the desk, and lights. I don't know how to fix it to go in more or if I am…Continue

Tags: Legos, Stopmotion, Dragonframe

Vacant Planet - Picture Book made with Stop Mo puppets

Started by Chris Neuhahn in YOUR STOPMO FILM PROJECT. Last reply by Hendrikus De Vaan yesterday. 2 Replies

Hey everybody,I've been working a Stop Motion project called Vacant Planet. Its the story of robots left on earth after humans fled. Unfortunately I don't have the time to animate the…Continue

Mild steel vs tool steel vs brass (with stainless balls)

Started by Hendrikus De Vaan in ARMATURES. Last reply by Hendrikus De Vaan yesterday. 5 Replies

Hi guys, I was just wondering if you had any thoughts about making sandwich plates out of brass, instead of mild steel? I understand that whatever material you use for the plates should be softer than the ball itself.I imagine tool steel is used in…Continue

Software for making a workshop

Started by Marcs in STOP MOTION & COMPUTERS. Last reply by Evan DeRushie yesterday. 11 Replies

Hallo friends,i will make a stopmotion-workshop at my University. I usually work with dragon frame and ask them if there are temporary licenses for the students. But there is just the option to buy licenses a litte cheaper. The students have to do a…Continue

Hello All Must Read

Started by Bryan Allgood in NEWBIE CORNER. Last reply by Bryan Allgood on Sunday. 9 Replies

Hi All.I am new here and new to stop motion animation.I have just bought my first basic armature kit.My hope is to learn as much as possible.Mainly:How does one add clay and sculpt?It comes with eyes,how do you add them?bRYAZZ. Continue



Create a Blog for your personal page. Go to My Page and click on Blog Posts. Access all Blog Posts here.




© 2015   Created by Anthony Scott.   Powered by

Badges  |  Report an Issue  |  Terms of Service

.xg_widget_forum_index_index .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_listForCategory .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_show .xg_column.xg_span-7.xg_last {display:none;}