Test for ship propulsion Mat. The 3D will represent 60% of the film. It is a personal choice and a practical choice. The purist will stop motion disappointed. My knowledge is very limited 3d. But sti…

Test for ship propulsion Mat. The 3D will represent 60% of the film. It is a personal choice and a practical choice. The purist will stop motion disappointed. My knowledge is very limited 3d. But still I managed to get a result that pleases me. In fact, my biggest challenge for this project and achieve almost tell a story without words. For that, I’m not going to focus on a single technique. I love stop motion magic this technique to keep from the original film. I do not like the real long movies with real actors. They bore me. They contain more for me, magic long ago. 3d, it gives me the neccessary space to tell the story. If I were to build the ship mast, it will 3 meters high and 6 meter long. My apartment is 60m2 and I peus that conssacrer 10m2 for the moment in my project. With my 3D software and my computer, I have an entire universe of available. Of course, all Difficulty is to keep the magic of stop motion in a 3d world. Finally, at the end of ends, art is just to erase a story.

Un test de propulsion pour le vaisseau de Mat. La 3d va représenter 60% du film. C’est un choix personnel et un choix pratique. Les puriste de la stop motion seront déçu. Mes connaissances en 3d sont  très limitées. Mais je parviens quand même a obtenir un résultat qui me plait. En fait, mon plus grand défi pour ce projet et de parvenir à raconter une histoire presque sans parole. Pour cela, je ne vais pas m’attacher à une seule technique. J’aime la stop motion pour la magie que cette technique à conserver depuis l’origine du cinéma. Je n’aime plus depuis longtemps les vrai films avec de vrai acteurs. Ils m’ennuient. Ils ne recèlent plus, pour moi, de magie depuis bien longtemps. La 3d, elle, m’offre l’espace neccessaire pour raconter l’histoire. Si je devais construire le vaisseau de mat, il ferai 3 metres de haut pour 6 metre de long. Mon appart fait 60m2 et je ne peus que conssacrer pour le moment que 10m2 à mon projet. Avec mon logiciel 3d et mon ordi, j’ai un univers entier de disponible. Bien sur, toute la difficultée est de garder la magie de la stop motion dans un univers 3d. Enfin, à la fin des fins, la technique doit s’éffacer pour juste raconter une histoire.

Views: 39

Comment

You need to be a member of StopMotionAnimation.com to add comments!

Join StopMotionAnimation.com

GUMBY FEST 2015

MESSAGE BOARD QUICK LINKS

Message Board

Steel Cut Oats

Started by Harry Chaskin in YOUR STOPMO FILM PROJECT. Last reply by Skylure Genavieve 19 hours ago. 12 Replies

Hello All! Wanted to let you know about a new short film I am making entitled Steel Cut Oats. I don't usually ask for help when it comes to my personal projects, but I finally bit the bullet and I'm launching a Kickstarter campaign in order to raise…Continue

Monster Makers Foam -- New Mix Ratios

Started by Santino Vitale in CASTING. Last reply by Santino Vitale on Friday. 2 Replies

Hello all,I'm not sure how many of you out there use Monster Makers foam latex -- for me, it's the ONLY foam I ever use and have recommended it highly over the years.... till recently.This past week, I bought a new quart kit for a project, and…Continue

Tags: gelling, bad, puppets, casting, makers

Lookinbg for some stop motion dinosaurs

Started by John Martin in NEWBIE CORNER. Last reply by John Martin on Thursday. 4 Replies

I am a filmmaking veteran of 43 years. I began in 8MM and moved on with the times, now shooting in digital. I am not a professional. My very first film was a stop motion project called MONSTER ISLAND. To make a long story short, after 43 years, I am…Continue

Has anyone cast from polyamide 3d prints?

Started by Joshua Liebling in CASTING. Last reply by Joshua Liebling on Thursday. 2 Replies

Polyamide plastic will apparently break down with water exposure, so this rules out gypsum molds. I'm curious if anyone here knows whether two-part silicone putty or other material would work with polyamide? I know this can be done with PLA. My end…Continue

Tags: mold, making, polyamide, casting, printing

Lighting Equipment

Started by Krista W in ANIMATION TOOLS & EQUIPMENT. Last reply by StopmoNick on Thursday. 1 Reply

Hello, I recently received funding for my stop motion project.  I would like to purchase lighting equipment that I can use for this and future projects.  Any suggestions? Lighting is the one area that I don't know much about. Thoughts on dimmer? Any…Continue

Please Introduce Yourself

Started by Anthony Scott in CHAT BOARD. Last reply by Chris Neuhahn on Wednesday. 459 Replies

Use this space to tell everyone about yourself and your interest in stop motion animation.Continue

BLOGS

Create a Blog for your personal page. Go to My Page and click on Blog Posts. Access all Blog Posts here.

Photos

Loading…

Members

© 2015   Created by Anthony Scott.   Powered by

Badges  |  Report an Issue  |  Terms of Service

.xg_widget_forum_index_index .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_listForCategory .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_show .xg_column.xg_span-7.xg_last {display:none;}