Replacement Face - Material Comparison

I thought people might be interested to see my study into the comparison of the materials that can be used in replacement face animation.

I think the difference between them all is amazing!

http://gracediggensprototyping.wordpress.com/

Comment by StopmoNick on February 28, 2013 at 7:13pm

Very helpful!  Are those all made from the same 3d object files, on the same printer, the only difference being the material?   Looks like, of the 3, the high res plastic is the only one worth considering.

Comment by Grace Diggens on March 1, 2013 at 3:42am

Hi Nick! Yes they're all made from the same file, different printers though. The powder one was printed on a ZPrinter 450 (I think it's one model earlier than the machine LAIKA use, ZPrinter 650), the central plastic one is printed on a Dimension Elite. And the right high resolution plastic is printed on a Objet Polyjet printer.
I agree that the high res one looks so much better than the others, but it also cost me a lot more to get printed!

Comment by Steve Copeland on March 1, 2013 at 11:43am

Thanks for posting this. I went over to your blog to get the rest of the story. It was a good read.

Comment by Grace Diggens on March 1, 2013 at 1:32pm

No problem Steve, glad you liked my blog! :D

Comment by Steven Garrett on March 2, 2013 at 11:15am

I had to build a simple RP machine from a kit for a school that I work at, its not that refined and the finished model would require sanding before final paint job, but it only cost about £800 pounds which is cheap in RP terms.

Comment by Grace Diggens on March 2, 2013 at 2:44pm

Woa that is cheap! Presuming that cap was printed on it, the results look pretty decent too!

Comment by Steven Garrett on March 2, 2013 at 3:56pm

yes it is cheap! but does leave little lines on each layer that need to be sanded out.....you can see these lines if you click on the picture to zoom-in.

I did find another kit a while back that is similar and was about £600.

Comment by Grace Diggens on March 3, 2013 at 2:57pm

Oh man, it just makes me want to spend all my savings on one!

Comment by Steven Garrett on March 4, 2013 at 9:00am
Comment by Grace Diggens on March 6, 2013 at 3:20pm

Ooo nice thanks for all the links! I'll let you know if I buy one. haha.

Comment

You need to be a member of StopMotionAnimation.com to add comments!

Join StopMotionAnimation.com

Puppet Putty

Puppet Putty is formulated by clay animator Don Carlson. Properties include colors that do not bleed on your hands, a matte finish, cleans up with water, is very light weight, firm, non-greasy and has a silky texture.

MESSAGE BOARD QUICK LINKS

Message Board

Dragonframe Live View looks like thermal camera!

Started by Christopher Olsen in STOP MOTION & COMPUTERS. Last reply by StopmoNick 6 hours ago. 8 Replies

Anybody have any idea why my live view screen looks like this? It is like the camera only wants to show a single color channel in live view. The actual capture looks fine...but if I have to animate using this crappy looking single-channel pass that…Continue

LIGHTING!

Started by Becky Weston in NEWBIE CORNER. Last reply by StopmoNick 6 hours ago. 18 Replies

Hello fellow stop motion-ers!I have managed to teach myself enough to make a few stop motions, but I still don't quite understand what type of lighting/bulbs to use to prevent the subtle flickering throughout an animation? I want to be able to…Continue

Tags: flicker, no, cheap, lighting

Live Chat On AnimateClay.com Reminder

Started by Ron Cole in ANIMATOR TALK. Last reply by Ron Cole 7 hours ago. 240 Replies

Don't forget, on WEDNESDAYS (Thursdays on the first week of each month)  there's a…Continue

Fitting components inside a slush cast head

Started by Anthony Leigh in GENERAL PUPPET MAKING. Last reply by Anthony Leigh 23 hours ago. 6 Replies

I have three heads which I are going to have moulds made of them, and then are going to be slush cast. I want to put little wooden blocks inside the head with holes for the eyes to sit in, wire and epoxy for the nose and epoxy putty teeth with a…Continue

Tags: slush, head, cast, mould, latex

Now Taking Commissions...

Started by Paul O'Brien in GENERAL PUPPET MAKING yesterday. 0 Replies

Hi All!After a few long months of clearing some freelance work I am now finally in the position to fit in some commissioned stop-motion work. I have space available to produce puppets of all kinds. A full service can be offered from character design…Continue

Tags: services, armatures, animation, puppets

Puppet casting in flexible polyurethane

Started by Jack Spiggle in NEWBIE CORNER. Last reply by StopmoNick yesterday. 3 Replies

Hey guys, Im new here and this is my first post so be gentle =3. Im looking to do a simple, 1-3 min (roughly) stop motion "exercise" just to see what I can do. I've made the storyboard, am attempting an anamatic and I am almost ready to start making…Continue

Tags: silicone, polyurethane, flexible, puppets, Casting

Photos

Loading…

Events

BLOGS

Create a Blog for your personal page. Go to My Page and click on Blog Posts. Access all Blog Posts here.

Members

© 2014   Created by Anthony Scott.   Powered by

Badges  |  Report an Issue  |  Terms of Service

.xg_widget_forum_index_index .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_listForCategory .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_show .xg_column.xg_span-7.xg_last {display:none;}