Howdy people. This may seem like an odd question or one with an obvious answer. I have a room in my basement with a space about 16' x 14' that I am converting into a studio for stop motion. I have a 7' work bench in there for model/set construction, an 8' shelving system and have room for a 7' x 4' table for sets. (not sure if that's too big). The ceiling is open & all set for lighting. Aside from opinions on what size my table should be for sets/animation, I am really not sure what the best color for the walls would be. I imagine it will certainly effect the lighting of sets. I could hang curtain rods from the ceiling and go the black curtain route. Any thoughts on the subject would be greatly appreciated.

Thanks!

Views: 319

Reply to This

Replies to This Discussion

The walls in my office/edit suite are 18% grey (rgb: 118,118,118). Makes for a great, neutral working environment. 

My studio walls are matte black. 

Man, if only I could get away with painting my walls black... That would be ideal! At the moment, I've got black curtain covering up the stop motion area.

Hendrikus De Vaan said:

The walls in my office/edit suite are 18% grey (rgb: 118,118,118). Makes for a great, neutral working environment. 

My studio walls are matte black. 

I wasn't allowed to paint them black, so I staple gunned black building paper all over them. Sort of like temporary wall-paper or something.


That works too- as long as the paper is completely matte. 

I've had issues in the past with a blue background that wouldn't key out right. The reason ending up being that light was reflecting off of it and creating hot spots. You could have a simliar issue with black poster paper, if it's glossy. I think you can get 3M matting spray, though.

It's matte paper. They use it here for roofing etc I think. The way I shoot makes it a bit of a non-issue though, because I have such a slow turnover I can triple check exposures.

I had a scene where I used some green plastic sheeting as a greenscreen, and it was not matte enough.  It reflected some white light back at the camera in spots, just like Don's blue screen.  But I got a polarising filter for my camera - you screw it on the end of your lens, and then rotate it to get the right angle, and magically all the reflections disappear!  

Normally I use matte wall paint so it's not an issue, but the polarising filter made my semi-gloss plastic work ok and let me shoot the sequence.  I got it at the nearest camera store, the right size to fit on a Nikon lens.

I have now been shooting my backlight shots with cheap black cloth covering all the white screen that is not visible in the shot, and it has reduced the stray light quite a lot.  

Ahh, good call, NIck! Did you have to make the kicker light brighter to compensate for the filter? 

I got a bunch of left over greenscreen from the Spartacus WOTD TV series. I guess it's only about 4ft by maybe 6ft, but it was free and should be sufficient for 99% of things I need it for.

Ask around local production companies and rental houses (especially after big budget films/series), you'd be surprised what they throw away. A lot of gells etc that are too small for live action are perfect for stopmo.

Anyway, I guess I'm digressing from the OP now.

Black is best, and certainly the best if you're doing time exposures with generally low light levels in the first place.  While not as light absorbing as velvet, the stuff Nick mentions is known in the US as Duvetyn ( or commando cloth) for creating either dividers for your space, or wall draping.

Motion control stages from days past were basically large black rooms with dividers created as needed for each set-up using this stuff.  It's "somewhat" fire resistant, but that's not license to put hot lights right against it, of course.  Flags (lighting control panels placed in front of lights) are often covered with the heaver duty cloth.

Cheapest pricing US pricing I'm aware of... I've ordered from these folks quite a bit... don't get the lightest weight if you have light behind it you want to black out, go for the middle or the heaviest.  10' tall and as long as you want...

http://www.rosebrand.com/product271/Duvetyn-Black-FR.aspx?cid=151&a...(Duvetyne)

Regards,

Jim Arthurs

Thanks Jim! I actually found black velvet curtains at a local drapery shop..grommets on top so they were easy to hang on cheap poles. 

Reply to Discussion

RSS

Puppet Putty

Puppet Putty is formulated by clay animator Don Carlson. Properties include colors that do not bleed on your hands, a matte finish, cleans up with water, is very light weight, firm, non-greasy and has a silky texture.

MESSAGE BOARD QUICK LINKS

Message Board

Change to look of site?

Started by StopmoNick in SITE FEEDBACK. Last reply by Anthony Scott 11 minutes ago. 17 Replies

Since yesterday, the whole look of the site has changed... or is it just me?  It is now a wide blinding landscape of pure white, such as Scott of the Antarctic would have faced!   Text is in black.Windows like the one to add an image have a clear…Continue

Wombok's got a trailer 2015

Started by Miles and Jules in YOUR STOPMO FILM PROJECT. Last reply by John Downey 58 minutes ago. 8 Replies

Hi Gang..we finally decided on a trailer for our film. https://www.youtube.com/watch?v=8ANhKKgF5Tglet us know war you think?cheersM&JContinue

Tags: forest, wombok

Live Chat On AnimateClay.com Reminder

Started by Ron Cole in ANIMATOR TALK. Last reply by Ron Cole 15 hours ago. 254 Replies

Don't forget, on WEDNESDAYS (Thursdays on the first week of each month)  there's a…Continue

Home set up for silver soldering

Started by Roos Mattaar in MACHINE SHOP. Last reply by Roos Mattaar yesterday. 41 Replies

Hi there,Not a very much used part of the message board it seems here, but seems most appropriate for my question...I finally have a great space to use as my own stop motion workshop/studio, hooray!I have done some ball and socket armature making…Continue

Armature components

Started by Spencer McCarlie in NEWBIE CORNER. Last reply by Roos Mattaar yesterday. 6 Replies

Hey guys, I'm on the hunt for some armature joints and useful pieces.All I can find online are quite expensive so I was wondering if anyone had came across cheap parts?I do try and make my own for now but that's just from wire and I'm trying to get…Continue

Tags: Armatures

Canon Rebel T5 Adapter & Lens?

Started by Ron Cole in CAMERA & STAGE. Last reply by Jim Arthurs on Monday. 23 Replies

I recently purchased a Canon Rebel T5 (not T5i) and I need to buy a Nikon lens and lens adapter for it. I thought that would be easy but I've been frustrated for days trying to figure out what to buy. All I want is a basic standard lens. (I was…Continue

Tags: Nikon, lens, adapter, T5, Rebel

Photos

Loading…

BLOGS

Create a Blog for your personal page. Go to My Page and click on Blog Posts. Access all Blog Posts here.

Members

© 2015   Created by Anthony Scott.   Powered by

Badges  |  Report an Issue  |  Terms of Service

.xg_widget_forum_index_index .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_listForCategory .xg_column.xg_span-7.xg_last {display:none;} .xg_widget_forum_topic_show .xg_column.xg_span-7.xg_last {display:none;}